I changed the power supply for my pc, but why won't it boot up now? - power supply advice pc
I have the power of 250 watts to 500 watts, but then I have had it, only the light that feeds the fan turns on and the light that tells me that the computer does not boot s' Lighter not as usual. The new power supply has a 12V connector, and it did not. The motherboard is a socket that fit perfectly into the 12V connector, but I think if I connected, could cause a short circuit on the motherboard. If this is the case? Is there a way to fix now? which if not taken to 12V, which would be then? Sorry if a lot of questions and I thank you for any useful advice.
Sunday, January 31, 2010
Power Supply Advice Pc I Changed The Power Supply For My Pc, But Why Won't It Boot Up Now?
5 comments:
Are you sure that you have the hard drive in conjunction with the motherboard? the disk in the diet? Eating on the motherboard? Have you sure you touch metal before the computer you are? (not able to do damage to the chip) cause
Is that why the computer does not work ... or disconnect the monitor ...
I think you need to check a few things to first ... more
First, you have tried the new food with the 12V connector is not connected? Is this new 12V connector will cause problems if you do not use before.
On the other side to check that everything is properly connected - including PCI, AGP video cards, memory, etc.
Thirdly, when you start your computer if you have the PC speaker (the internal sound card is not one) is a beep at all. If yes, is not lost, the response is significant that the jury, what is wrong. It is generally well cards do not grow properly, the memory is not the right way or not in the processor correctly.
Also check the motherboard, that all bridges in the right place and the case are properly connected mainly to check the cables (positive to positive, etc..) Another important point to reset the jumper to the BIOS. If the teams do not try to "clear" position and then brought back to its normal position before you see your computer in IMP (Orthant NOT Turn on your computer if the BIOS jumper is clear, of course, in a state! - If you already have, you can get away with it, if you're lucky!)
Finally, another way to see if the m / board is still working with old AC adapter, if there are likely to Silicon Heaven
The idea that another 12 power for the CPU the thread of the exposure of 12 V at the connector so as not to overheat and melt the connector.
Egads!
"Difficult to find" part of a computer repair is not the actual repair attempts is usually exactly what needs to be repaired. Just as the question said that the relationship between diet Oldest first. If everything works well, is the new power supply, not the fix for the motherboard or old components in the field. Or the "new" Power May not work on it. This is a disturbing finding boring, because it requires a voltmeter and you go to any track that extends from the diet. It is not difficult, just tedious. S Worst come to worse, take it to the shop, I'm sorry, can not exceed the offer.
Well, first I want to connect 250 in connection to back if you still today. If it still works, then you are well are available. And from there. I know that this is not the answer to your question entirely, but there are so many variables that should be much more all that I could be wrong or went wrong list. If something fried on the motherboard, we consider it desirable.
Post a Comment